TENGFEI G468B RJ45 AND BNC NETWORK TESTER
TENGFEI G468B RJ45 AND BNC NETWORK TESTER

RM33.00
Shipping Fee:
Shipping Fee to KL City, Kuala Lumpur
Shipping Fee Loading...
Standard delivery 2 - 5 days
G468B:
Qty:
5 Stock Left
14 days return to seller
Change of mind applicable
3 Months Local Supplier Warranty
 

Product Specification

Brand:
NO BRAND
Model:
MW-G468
SKU:
MW-G468
Warranty Type:
Local Supplier Warranty
Warranty Period:
3 Months
What's in the box:
RJ45 AND BNC NETWORK TESTER

Product Description

TENGFEI G468B RJ45 AND BNC NETWORK TESTER

Function : 
  • For twisted-pair 1,2,3,4,5,6,7,8,G, every one will be tested, and distinguish which one (pair) will be false wiring, short circuit or open circuit.
  • TL-468B Test RJ45 , RJ11 , BNC
  • Twisted-pair testing : Push FUNCTION Key for 3 seconds to boot, meanwhile the AUTO light will flash, and then you can carry out automatic scan test. Insert wiring plugs into major tester and remote tester respectively, then the indicator lights of mainframe from 1 to G will flash one after another.
illustrate : 

major tester :

  • 1-2-3-4-5-6-7-8-G

Remote tester : 

  • 1-2-3-4-5-6-7-8-G (RJ45)
  • 1-2-3-4-5-6-------- (RJ12)
  • --2-3-4-5----------- (RJ11)
  • 1-2-3-4------------- (USB)
  • 1-2------------------ (BNC)

If connection is wrong, display as follows : 

  • While there is one of wiring disconnected such as 3, the 3rd indicator light of major tester and remote tester will not light up.
  • While there are several wirings in turnoff, the indicator lights of which will not light up. And if the quantity of the connected wirings is less than 2, there will be no lighted indicator lights.
  • If both ends of the wiring were connected , for example, the 2 and 4 are connected , and then show as following : 
  • Major tester normal : 1-2-3-4-5-6-7-8-G
  • Remote tester will be : 1-4-3-2-5-6-7-8-G
  • While there are two lines short circuits, the major tester display is normal and the two cresset of remote tester is dim light indicate short circuit. If there are more than three wiring in short circuits, then corresponding cresset will unlighted.
  • Press key "F" in the course of testing so as reset the 1st light then restart the test. Return to the 1st light two seconds after pressed key "F" and enter the test of manual-step motion circulation, then press "F" once, the number of lights add one in turn. It can repeat continuously unless you want to exit the process and return to the auto-circulation mode by pressing the key "F" for 2 seconds.
  • If you want to turn off, push key "F" for more than 5 second at any mode.
  • If the tester was not in use, it will be off automatically after 20 minutes.

Product Ratings

0 /5
0 Rating
0
0
0
0
0


  • This product has no reviews.
    Let others know what do you think and be the first to write a review.